Dental Bearing R2-5zz Sr2-5tlzw 3.175*7.94*3.57mm

• Aligning: Non-Aligning Bearing
• Separated: Unseparated
• Rows Number: Single
• Load Direction: Radial Bearing
• Material: Ceramic
• Place of Origin: Shandong China (Mainland)
• Model NO.: SR2-5TLZW
• Transport Package: According to Per Client′s Requirements
• Trademark: Netural
• Origin: China
• HS Code: 8482109000
• Production Capacity: 50000 Pieces/Month

Product Description

dental bearing R2-5zz SR2-5TLZW 3.175*7.94*3.57mm

The Dentist Dental Dental bearing is a special mobile phone bearing. Company production of dental drill bearing inner and outer rings through refining stainless steel (9Gr18) materials; ball by refining stainless steel (9Gr18) or non-metal super hard Si3N4 materials with good wear resistance; holder has the advantages of high strength, low friction with.
And a self lubrication performance of polyimide or 80 ~ 120 phenolic clamp cloth bakelite material, dental drill bearing in 200 ~ 250Kpa air pressure, speed up to 350000 ~ 400000rPm. Under normal condition, dental bearing working life for more than 6 months.
High speed dental cell phone bearing manufacturing accuracy in line with the national standard P4 level GB/T307.1-94 tolerance, can be applied to different types of dentists in the world.
With the development of medical technology, now the high-speed dental drill mobile phone with more design, but each kind of design include turbine, head, couplings, and a bit. In the turbine driven by the drill bit can reach maximum speed of 450 thousand revolutions per minute.
The drill bit is the most important part of the dental drill. It is short and highly durable, able to withstand very high RPM as well as the resulting high temperature. The air turbine engine is sandwiched between 2 high speed bearings and is wrapped in a bit, which is driven directly by a series of drive shafts and gears. The key factor to achieve high speed dental drill bearing. Therefore, the precision of the bearing, materials, structure, and the rolling body, channel and maintain the material on dental drill bearing performance has a direct impact. The supply of dental bearings are important for any dental and dental mobile phone manufacturers a reliable partner.
1 true 450000 RPM high speed
Dedicated P4 / ABEC 7 precision
Stainless steel (440 C) and ceramic ferrule (silicon nitride) ball
Compound fiber reinforced phenolic retainer
If the drill bit can reach very high speed, can reduce the pain of patients in the treatment of teeth. 45 thousand revolutions per minute is internationally recognized dental drill bearing can reach the highest speed can reach the requirement of bearing manufacturer in the world did not several, and strong bearing force is really one of them. In order to produce the highest quality of dental drill bearing, we did a lot of tests and experiments, up to now we have stable yield and quality bearings.
2 dedicated ABEC7 P4 bearing precision:
In addition to 450000 rpm, it is another important factor to measure a bearing manufacturer's ability to achieve ABEC7 P4 bearing accuracy. Although many factories in their products marked P4/ ABEC7 precision, but once you find the use of these bearings can be easily them and not the degree of accuracy and the accuracy grade of most of these counterfeit bearings only ABEC3. This is part of the dental bearing special low price.
But the low quality of the dental bearing will greatly hurt the drill and mobile phone equipment. According to statistics, more than 60% of the bearing market is flooded with fake bearings. Due to the limitation of materials and manufacturing technology, the rigidity of these low end bearings can not meet the national standard, which will shorten the service life of the instrument, and cause damage to other parts. The gap between different ABEC accuracy levels may also lead to assembly difficulties, or even scrap the entire device. Intense bearing has become the country's leading micro bearing manufacturers, and truly achieve the ABEC7 P4 level, and even individual models can reach ABEC9 P2.
3 stainless steel (440 C) and ceramic ferrule (silicon nitride) ball material:
These rings can drill bearing made of stainless steel (9Gr18), and the rolling of the material is a silicon nitride ceramic ball. The selection of high quality raw materials significantly improved the durability of the bearing and speed, so as to ensure the overall performance of the dental drill bearing.
4 composite fiber reinforced phenolic retainer:
100% focus on the details of each bearing product quality. Compound fiber reinforced phenolic retainer has been treated by a rigorous and complex chemical process. To ensure that the bearing can be under the maximum 450 thousand speed of about 18 months of operating life, and the whole process of the rotation is low noise, low vibration. Because of the chemical oil immersed in a retainer, so these dental bearing with self lubrication function good.
Mobile phone maintenance drill bearing
1 clean exterior surface of the nose.
2 insert drill chuck.
3 according to the following steps to clear the phone inside the head:
A. spray cleaning for 1 to 2 seconds.
B. use paper towels to wipe the nose of debris and debris.
C. repeat the above 2 steps until completely clean.
D. dry nose surface of the liquid.
E. repeat the action until the surface is completely dry.
4 according to the manufacturer's instructions with mobile phone disinfection drill.
5 head cooling to room temperature.
6 drops of 2 drops of lubricating oil into the drive air pipe.
7 wipe off the excess oil.
8 wipe the outer surface.
9 now the drill can use mobile phone.
In order to guarantee high speed performance, dental bearing loading unit should add a certain axial load. Users in the installation and use should be careful operation and careful installation and maintenance, in order to avoid damage to the ball and channel, bearing pollution and improper lubrication will directly affect the performance index and service life. Our dental drill bearing products include: dental bearings, bearings for dental, dental handpiece bearings, dental bearings, dental handpiece Peilin, high-speed bearings, bearing phone bur bearing.

SR144TLN-LB064	SR144TiKZWN
DR02B SR144TiZN	SR144TiZN
DR09B SR2-5TiZWN	SR144TL
DR21B sr144tIKZN	SR144TL
DR70B SR144TiKZWN	SR144TLKZWN
SFR144K1TLGZ1WN	SR144TLKZW
SFR144K1TLGZWN	SR144TLKZN
SFR144K1TLGZWN-LB064	SR144TLKZWN
SFR144K1TLZWN	SR144TLKZW02N
SFR144K1TLZWN-LB064	SR144TLKZWN
SFR144TLGZ1WN	SR144TLKZWN-LB064
SFR144TLGZWN	SR144TLKZWo2N
SFR144TLN	SR144TLN
SFR144TLZWN	SR144TLW
SFR144TLZGZWN	SR144TLW1.9N
SFR144TLZWN	SR144TLZ1N
SFR144TLZWN-LB064	SR144TLZN
SR144K1TiKZWN	SR144TLZN
SR144K1TiZN	SR144TLZWN
SR144K1TiZWN	SR2-5K1TLZWN
SR144K1TLKZW02N	SR2-5TiZWN
SR144K1TLKZWN	SR2-5TLZW
SR144K1TLKZW02N	SR2-5TLZWN
SR144K1TLN	SR144K1TLWN
SR144K1TLN-LB064	SR144K1Z1TLN
SR144K1TLZ1WN
SR144K1TLZ1WN-LB064
SR144K1TLZN
SR144K1TLZWN

1. S-stainlesss steel ring
2. F-outer ring with flange
3. R144 is the bearing's standard model
4. K1-inner ring is separable, K2-outer ring is separable.
5. K-outer ring with steps
6. TL-torun black cage, Ti-phenolic cloth bakelite cage, TP-yellow polyimide cage
7. Z-outer ring one side with seal. Z1-outer ring one side with whole seal
8. W-inner and outer ring width 2.78mm, W02-outer ring width 2.38mm, inner ring 2.78mm, W01- outer ring width 2.78mm, inner ring 2.38mm.
9. N-ceramic ball
10. Ball number: 8-stands for 8 pieces ball, not with numbers means 7 pieces ball.
11. G stands for outer rings with groove, flange depth 0.42mm
12. FF-double flange
 

Bearing no	d(mm)	D(mm)	B(mm)	Bearing no	d(mm)	D(mm)	B(mm)
51101	12	26	9	511126	130	170	30
51102	15	28	9	511128	140	180	31
51103	17	30	9	511130	150	190	31
51104	20	35	10	511132	160	200	31
51105	25	42	11	511134	170	215	34
51106	30	47	11	511136	180	225	34
51107	35	52	12	511138	190	240	37
51108	40	60	13	511140	200	250	37
51109	45	65	14	511144	220	270	37
51110	50	70	14	511152	260	320	45
51111	55	78	16	511156	280	350	53
51112	60	85	17	511160	300	380	62
51113	65	90	17	511164	320	400	63
51114	70	95	18	511168	340	420	64
51115	75	110	19	511172	360	440	65
51116	80	105	19	511180	400	480	65
51117	85	110	19	511184	420	500	65
51118	90	120	22	511192	460	560	80
51119	95	145	60	511196	480	580	80
511120	100	130	25	511/500	500	600	80
511122	110	145	25	511/530	530	640	85
511124	120	155	25	511/670	670	800	105

600 Ceramic bearings
Bearings Model	d	D	D-d	B
603	3	9	6.000	3
604	4	12	8.000	4
605	5	14	9.000	5
605LL	5	14	9.000	5
606	6	17	11.000	6
606LL	6	17	11.000	6
607	7	19	12.000	6
607LL	7	19	12.000	6
608	8	22	14.000	7
608L	8	22	14.000	7
608LL	8	22	14.000	7
609	9	24	15.000	7
609LL	9	24	15.000	7

 

Bearing No	Bearing No	Bearing No	Bearing No	Bearing No	Bearing No	Bearing No	Bearing No
6000CE	6200CE	6300CE	6800CE	6900CE	623CE	1200CE	UC203CE
6001CE	6201CE	6301CE	6801CE	6901CE	624CE	1201CE	UC204CE
6002CE	6202CE	6302CE	6802CE	6902CE	625CE	1202CE	UC205CE
6003CE	6203CE	6303CE	6803CE	6903CE	626CE	1203CE	UC206CE
6004CE	6204CE	6304CE	6804CE	6904CE	627CE	1204CE	UC207CE
6005CE	6205CE	6305CE	6805CE	6905CE	628CE	1205CE	UC208CE
6006CE	6206CE	6306CE	6806CE	6906CE	629CE	1206CE	UC209CE
6007CE	6207CE	6307CE	6807CE	6907CE	603CE	1207CE	UC210CE
6008CE	6208CE	6308CE	6808CE	6908CE	604CE	1208CE	51100CE
6009CE	6209CE	6309CE	6809CE	6909CE	605CE	1209CE	51101CE
6010CE	6210CE	6310CE	6810CE	6910CE	606CE	1210CE	51102CE
6011CE	6211CE	6311CE	6811CE	6911CE	607CE	2200CE	51103CE
6012CE	6212CE	6312CE	6812CE	6912CE	608CE	2201CE	51104CE
6013CE	6213CE	6313CE	6813CE	6913CE	609CE	2202CE	51105CE
6014CE	6214CE	6314CE	6814CE	6914CE	683CE	2203CE	51106CE
6015CE	6215CE	6315CE	6815CE	6915CE	684CE	2204CE	51107CE
6016CE	6216CE	6316CE	6816CE	6916CE	685CE	2205CE	51108CE
6017CE	6217CE	6317CE	6817CE	6917CE	686CE	2206CE	51109CE
6018CE	6218CE	6318CE	6818CE	6918CE	687CE	2207CE	51110CE
6019CE	6219CE	6319CE	6819CE	6919CE	688CE	2208CE	51111CE
6020CE	6220CE	6320CE	6820CE	6920CE	689CE	2209CE