51101 Stainless Steel Thrust Ball Bearing

• Customization: Available
• Place of Origin: Shandong China (Mainland)
• Rolling Body: Ball Bearings
• Model NO.: 51101
• The Number of Rows: Single
• Outer Dimension: Small and Medium-Sized (60-115mm)
• Spherical: Non-Aligning Bearings
• Aligning: Non-Aligning Bearing
• Separated: Unseparated
• Rows Number: Single
• Load Direction: Thrust Bearing
• Material: Stainless Steel
• Transport Package: According to Per Client′s Requirements
• Trademark: Netural
• Origin: China
• HS Code: 84828000
• Production Capacity: 60000 Pieces/Month

Product Description

51101 stainless steel Thrust Ball Bearing

Thrust ball bearing with high speed operation may withstand thrust load design, with the ball rolling by roll channel washer like rings. The ferrule for saddle shape, therefore, the thrust ball bearings are divided into flat seat type and self-aligning spherical cushion type two types. In addition, the bearing can bear axial load, but it can not bear radial load.
Thrust ball bearing:
Thrust ball bearings by seat, shaft ring and ball retainer assembly is composed of three parts.
The shaft with the said shaft ring, matched with a shell called seat.
Types:
According to the situation of the thrust ball bearings and two-way thrust ball bearings.
One way thrust ball bearing, can bear one-way axial load.
Two way thrust ball bearing can bear bidirectional axial load, in which the shaft ring and the shaft are matched with the axial load. The bearing seat of the installation is spherical, with self-aligning performance, can reduce the influence of the installation error.
The thrust ball bearing can not bear the radial load, and the limit speed is low.
Use of thrust ball bearings:
Only applicable to withstand side axial load, speed lower parts, such as crane hooks, vertical water pump, vertical centrifuge, Jack, speed reducer. Bearing ring, ring and rolling bodies are separated, they can respectively put down.

We supply:
Plastic deep groove ball bearing,
Plastic thrust ball bearing,
Plastic angular contact bearing,
Plastic pillow block bearing. Etc
Advantage: Wear-resisting, environmental protection, self-lubricating, absolutely electricity, no magnetic. Resistance to rust.

Packaging & Delivery
Packaging Detail: As customers' requirements / Standard export packing / Single box with plastic
Delivery Detail: 3-15 days

Introduction:
Plastic Bearings can often lead to more freedom from maintenance. Their resistance to dirt, dust and chemicals make plastic bearings a set-it-and-forget-it solution. Plastic Bearings can reduce costs up to 25%. They can be highly wear resistance, with a low coefficient of friction and can replace more expensive alternatives in many applications.
 

Model	d	D	T
	mm	mm	mm
51200	10	26	11
51201	12	28	11
51202	15	32	12
51203	17	35	12
51204	20	40	14
51205	25	47	15
51206	30	52	16
51207	35	62	18
51208	40	68	19
51209	45	73	20
51210	50	78	22
51211	55	90	25
51212	60	95	26
51213	65	100	27
51214	70	105	27
51215	75	110	27
51216	80	115	28
51217	85	125	31
51218	90	135	35
51220	100	150	38

 

	ID	OD	Width	chamfer	LOADING(KN)		BALL		WEIGHT
					Dynamic	Static	No.	Size	KG
					Cr	Cor		mm
6000	10	26	8	0.3	4.55	1.95	7	4.763	0.019
6001	12	28	8	0.3	5.1	2.39	8	4.763	0.021
6002	15	32	9	0.3	5.6	2.84	9	4.763	0.035
6003	17	35	10	0.3	6.8	3.35	10	4.763	0.04
6004	20	42	12	0.6	9.4	5.05	9	6.35	0.068
6005	25	47	12	0.6	10.1	5.85	10	6.35	0.079
6006	30	55	13	1	13.2	8.3	11	7.144	0.113
6007	35	62	14	1	16	10.3	11	7.938	0.149
6008	40	68	15	1	16.8	11.5	12	7.938	0.185
6009	45	75	16	1	21	15.1	12	8.731	0.231
6010	50	80	16	1.1	21.8	16.6	13	8.731	0.256
6200	10	30	9	0.6	5.1	2.39	8	4.763	0.032
6201	12	32	10	0.6	6.1	2.75	7	5.953	0.037
6202	15	35	11	0.6	7.75	3.6	8	5.953	0.045
6203	17	40	12	0.6	9.6	4.6	8	6.747	0.066
6204	20	47	14	1	12.8	6.65	8	7.938	0.106
6205	25	52	15	1	14	7.85	9	7.938	0.128
6206	30	62	16	1	19.5	11.3	9	9.525	0.199
6207	35	72	17	1.1	25.7	15.3	9	11.112	0.288
6208	40	80	18	1.1	29.1	17.8	9	12	0.366
6209	45	85	19	1.1	32.5	20.4	10	12	0.398
6210	50	90	20	1.1	35	23.2	10	12.7	0.454
6300	10	35	11	0.6	8.2	3.5	6	7.144	0.053
6301	12	37	12	1	9.7	4.2	6	7.938	0.06
6302	15	42	13	1	11.4	5.45	7	7.938	0.082
6303	17	47	14	1	13.5	6.55	7	8.731	0.115
6304	20	52	15	1.1	15.9	7.9	7	9.525	0.144
6305	25	62	17	1.1	21.2	10.9	7	11.5	0.232
6306	30	72	19	1.1	26.7	15	8	12	0.36
6307	35	80	21	1.5	33.5	19.1	8	13.494	0.457
6308	40	90	23	1.5	40.5	24	8	15.081	0.63
6309	45	100	25	1.5	53	32	8	17.462	0.814
6310	50	110	27	2	62	38.5	8	19.05	1.07

 

BearingNo	Bored(mm)	O.dD(mm)	WidthB(mm)	Load Rating		Weight(kg)
				Dynamic	Static
695	5	13	4	0.83	0.39	0.0022
696	6	15	5	1.13	0.56	0.0039
697	7	17	5	1.55	0.78	0.0053
698	8	19	6	2.03	1.05	0.0072
699	9	20	6	1.9	0.99	0.0075
6900	10	22	6	2.07	1.12	0.01
6901	12	24	6	2.2	1.24	0.011
6902	15	28	7	2.64	1.51	0.017
6903	17	30	7	2.79	1.66	0.018
6904	20	37	9	5.05	3.08	0.036
6905	25	42	9	5.63	3.68	0.042
6906	30	47	9	5.82	3.97	0.048
6907	35	55	10	9.5	6.8	0.074
6908	40	62	12	13.7	9.9	0.11
6909	45	68	12	14.1	10.9	0.132
6910	50	72	12	14.5	11.7	0.133

 

Flange	Open	Shield	Boundary Diameter
			d	D	Df
F	681		1	3	3.8
F	691		1	4	5
F	682	ZZ	2	5	6.1
F	602	ZZ	2	7	8.5
F	603	ZZ	3	9	10.5
F	623	ZZ	3	10	11.5
F	684	ZZ	4	9	10.3
F	685	ZZ	5	11	12.5
F	605	ZZ	5	14	16
F	606	ZZ	6	17	19
F	626	ZZ	6	19	22
F	607	ZZ	7	19	22
F	688	ZZ	8	16	18
F	608	ZZ	8	22	25