High Speed Dental Bearing Sr144tlzn Dental Bearings for Dental Machines

• Customization: Available
• Rolling Body: Ball Bearings
• The Number of Rows: Single
• Model NO.: SR144TLZN
• Outer Dimension: Small and Medium-Sized (60-115mm)
• Material: Bearing Steel
• Spherical: Non-Aligning Bearings
• Load Direction: Axial Bearing
• Separated: Unseparated
• ID: 3.175mm
• Od: 6.35mm
• Depth: 2.78mm
• Transport Package: Vacuum Package, Tube
• Specification: bearing steel GCR15
• Trademark: YD
• Origin: China
• HS Code: 8482102000
• Production Capacity: 100000 Pieces/Year

Product Description

High speed dental bearing SR144TLZN dental bearings for dental machines

The Dentist Dental Dental bearing is a special mobile phone bearing. Company production of dental drill bearing inner and outer rings through refining stainless steel (9Gr18) materials; ball by refining stainless steel (9Gr18) or non-metal super hard Si3N4 materials with good wear resistance; holder has the advantages of high strength, low friction with.
And a self lubrication performance of polyimide or 80 ~ 120 phenolic clamp cloth bakelite material, dental drill bearing in 200 ~ 250Kpa air pressure, speed up to 350000 ~ 400000rPm. Under normal condition, dental bearing working life for more than 6 months.
High speed dental cell phone bearing manufacturing accuracy in line with the national standard P4 level GB/T307.1-94 tolerance, can be applied to different types of dentists in the world.
With the development of medical technology, now the high-speed dental drill mobile phone with more design, but each kind of design include turbine, head, couplings, and a bit. In the turbine driven by the drill bit can reach maximum speed of 450 thousand revolutions per minute.
The drill bit is the most important part of the dental drill. It is short and highly durable, able to withstand very high RPM as well as the resulting high temperature. The air turbine engine is sandwiched between 2 high speed bearings and is wrapped in a bit, which is driven directly by a series of drive shafts and gears. The key factor to achieve high speed dental drill bearing. Therefore, the precision of the bearing, materials, structure, and the rolling body, channel and maintain the material on dental drill bearing performance has a direct impact. The supply of dental bearings are important for any dental and dental mobile phone manufacturers a reliable partner.
1 true 450000 RPM high speed
Dedicated P4 / ABEC 7 precision
Stainless steel (440 C) and ceramic ferrule (silicon nitride) ball
Compound fiber reinforced phenolic retainer
If the drill bit can reach very high speed, can reduce the pain of patients in the treatment of teeth. 45 thousand revolutions per minute is internationally recognized dental drill bearing can reach the highest speed can reach the requirement of bearing manufacturer in the world did not several, and strong bearing force is really one of them. In order to produce the highest quality of dental drill bearing, we did a lot of tests and experiments, up to now we have stable yield and quality bearings.
2 dedicated ABEC7 P4 bearing precision:
In addition to 450000 rpm, it is another important factor to measure a bearing manufacturer's ability to achieve ABEC7 P4 bearing accuracy. Although many factories in their products marked P4/ ABEC7 precision, but once you find the use of these bearings can be easily them and not the degree of accuracy and the accuracy grade of most of these counterfeit bearings only ABEC3. This is part of the dental bearing special low price.
But the low quality of the dental bearing will greatly hurt the drill and mobile phone equipment. According to statistics, more than 60% of the bearing market is flooded with fake bearings. Due to the limitation of materials and manufacturing technology, the rigidity of these low end bearings can not meet the national standard, which will shorten the service life of the instrument, and cause damage to other parts. The gap between different ABEC accuracy levels may also lead to assembly difficulties, or even scrap the entire device. Intense bearing has become the country's leading micro bearing manufacturers, and truly achieve the ABEC7 P4 level, and even individual models can reach ABEC9 P2.
3 stainless steel (440 C) and ceramic ferrule (silicon nitride) ball material:
These rings can drill bearing made of stainless steel (9Gr18), and the rolling of the material is a silicon nitride ceramic ball. The selection of high quality raw materials significantly improved the durability of the bearing and speed, so as to ensure the overall performance of the dental drill bearing.
4 composite fiber reinforced phenolic retainer:
100% focus on the details of each bearing product quality. Compound fiber reinforced phenolic retainer has been treated by a rigorous and complex chemical process. To ensure that the bearing can be under the maximum 450 thousand speed of about 18 months of operating life, and the whole process of the rotation is low noise, low vibration. Because of the chemical oil immersed in a retainer, so these dental bearing with self lubrication function good.
Mobile phone maintenance drill bearing
1 clean exterior surface of the nose.
2 insert drill chuck.
3 according to the following steps to clear the phone inside the head:
A. spray cleaning for 1 to 2 seconds.
B. use paper towels to wipe the nose of debris and debris.
C. repeat the above 2 steps until completely clean.
D. dry nose surface of the liquid.
E. repeat the action until the surface is completely dry.
4 according to the manufacturer's instructions with mobile phone disinfection drill.
5 head cooling to room temperature.
6 drops of 2 drops of lubricating oil into the drive air pipe.
7 wipe off the excess oil.
8 wipe the outer surface.
9 now the drill can use mobile phone.
In order to guarantee high speed performance, dental bearing loading unit should add a certain axial load. Users in the installation and use should be careful operation and careful installation and maintenance, in order to avoid damage to the ball and channel, bearing pollution and improper lubrication will directly affect the performance index and service life. Our dental drill bearing products include: dental bearings, bearings for dental, dental handpiece bearings, dental bearings, dental handpiece Peilin, high-speed bearings, bearing phone bur bearing.

SR144TLN-LB064	SR144TiKZWN
DR02B SR144TiZN	SR144TiZN
DR09B SR2-5TiZWN	SR144TL
DR21B sr144tIKZN	SR144TL
DR70B SR144TiKZWN	SR144TLKZWN
SFR144K1TLGZ1WN	SR144TLKZW
SFR144K1TLGZWN	SR144TLKZN
SFR144K1TLGZWN-LB064	SR144TLKZWN
SFR144K1TLZWN	SR144TLKZW02N
SFR144K1TLZWN-LB064	SR144TLKZWN
SFR144TLGZ1WN	SR144TLKZWN-LB064
SFR144TLGZWN	SR144TLKZWo2N
SFR144TLN	SR144TLN
SFR144TLZWN	SR144TLW
SFR144TLZGZWN	SR144TLW1.9N
SFR144TLZWN	SR144TLZ1N
SFR144TLZWN-LB064	SR144TLZN
SR144K1TiKZWN	SR144TLZN
SR144K1TiZN	SR144TLZWN
SR144K1TiZWN	SR2-5K1TLZWN
SR144K1TLKZW02N	SR2-5TiZWN
SR144K1TLKZWN	SR2-5TLZW
SR144K1TLKZW02N	SR2-5TLZWN
SR144K1TLN	SR144K1TLWN
SR144K1TLN-LB064	SR144K1Z1TLN
SR144K1TLZ1WN
SR144K1TLZ1WN-LB064
SR144K1TLZN
SR144K1TLZWN

 

Bearing Designation		Bore Diameter(d)		Outer Diameter (D)		Width(b)		Load Rating Cr(N)	Load Rating Cor(N)	Max. Speed(1000rpm)		Weight (g)
steel shields	rubber seals	mm	in	mm	in	mm	in			Grease	Oil
R1-4ZZ	R1-4 2RS	1.984	5/64"	6.35	1/4"	3.571	0.14	284	96	70	80	0.4
R133ZZ	R133 2RS	2.38	3/32"	4.762	3/16"	2.38	3/32"	144	53	85	95	0.1
R1-5ZZ	R1-5 2RS			7.938	5/16"	3.571	0.14	552	176	61	71	0.6
R144ZZ	R144 2RS	3.175	1/8"	6.35	1/4"	2.779	0.1094"	284	96	70	80	0.27
R2-5ZZ	R2-5 2RS			7.938	5/16"	3.571	0.14	558	180	57	67	0.5
R2-6ZZ	R2-6 2RS			9.525	3/8"	3.571	0.14	640	227	53	63	0.96
R2ZZ	R2 2RS			9.525	3/8"	3.967	5/32"	631	219	57	67	1.04
R2AZZ	R2A 2RS			12.7	1/2"	4.366	0.1720"	640	227	53	63	3.3
R155ZZ	R155 2RS	3.967	5/32"	7.938	5/16"	3.175	1/8"	359	150	53	63	0.51
R156ZZ	R156 2RS	4.762	3/16"	7.938	5/16"	3.175	1/8"	359	150	53	63	0.4
R166ZZ	R166 2RS			9.525	3/8"	3.175	1/8"	709	272	50	60	0.81
R3ZZ	R3 2RS			12.7	1/2"	4.978	0.1961"	1301	488	43	53	2.21
R3AZZ	R3A 2RS			15.875	5/8"	4.978	0.1961"	1480	621	35	45	45
1601ZZ	1601 2RS			17.462	11/16"	6.35	1/4"	1510	720			4.75
R168ZZ	R168 2RS	6.35	1/4"	9.525	3/8"	3.175	1/8"	373	172	46	56	0.57
R188ZZ	R188 2RS			12.7	1/2"	4.762	3/16"	1082	442	40	50	1.6
R4ZZ	R4 2RS			15.875	5/8"	4.978	0.1961"	1480	621	35	45	4.46
R4AZZ	R4A 2RS			19.05	3/4"	7.144	9/32"	2336	896	33	43	7.48
1602ZZ	1602 2RS			17.462	11/16"	6.35	1/4"	1510	720			6
R1810ZZ	R1810 2RS	7.938	5/16"	12.7	1/2"	3.967	5/32"	542	276	38	48	1.39
1603ZZ	1603 2RS			22.225	7/8"	7.144	9/32"	2540	1340			10
1605ZZ	1605 2RS			23.019	29/32"	7.938	5/16"	2540	1340			12
R6ZZ	R6 2RS	9.525	3/8"	22.225	7/8"	7.144	9/32"	3332	1422	28	38	9.02
R1038ZZ	R1038 2RS			15.875	5/8"	3.967	5/32"	815	411	21	31	2.71
1604ZZ	1604 2RS			22.225	7/8"	7.144	9/32"	2540	1340			15
1606ZZ	1606 2RS			23.019	29/32"	7.938	5/16"	2540	1340			14
1614ZZ	1614 2RS			28.575	1-1/8"	9.525	3/8"	3920	2240			35